Posts Tagged ‘color’
- All inventor part files: tweak to your heart’s content
- DWG Files to check tolerances
- STL files for a 3D Printer
- Laser files for the cover & Sign
- Various pictures to help with assembly
IntroductionAfter doing an expensive LED light up sign project last year (with a grant) with my CIM students, I was looking for a low cost alternative. In comes Scott Tobias, new CIM master teacher from Maryland. Thanks Scott for the great idea! You can make these signs for less than $3.00 apiece, depending on what you make the base out of. We 3D printed them at UK with an Affinia printer, as they were prototypes, but they could easily be CNC’d from Wax, Wood, or Renshape.
- Male A to Male A USB Cable: Amazon
- Color-changing 2 Leg LED Light: AdaFruit
- 68 ohm Resistor (100 will work): Anywhere
- 1/8″ Acrylic: Delvies
- Build the base. CNC or 3D print. Try to make sure that the LED comes in contact with the acrylic sign. Please see the enclosed Inventor Section view file for the dimensions and constraints. Also be sure to leave room in the base for all of the electronics.
- Design and build the sign. The more angles the better, as it will show off the light. Be sure to take into account the tolerance fit between the slot and the plastic. MEASURE the acrylic. It is NEVER really 0.125″!
- When engraving the sign, the deeper the engraving, the better it looks. Invert the text and print on the back!
- Assemble the parts. Sign into base, wire through side, Hot glue the led into slot, THEN solder!
- Solder the cathode, short leg of LED, to the 68Ω resistor.
- Solder the resistor to the BLACK wire of the USB cable.
- Solder the RED wire to the other side of the LED. Do NOT solder the green or white wires; do not even strip them!
- When soldering, you could use heat shrink tube to prevent short circuits.
- Insert the cover into the base. We cut the cover out of the same acrylic we made the sign out of, and just made it 0.005″ bigger in Inventor, and pressed it in. The hole in the bottom is there to pry it out if necessary.