Intelitek

TEACH VS RECORD

TEACH VS RECORD

Problem: What’s the difference between teach and record? Aren’t they the same thing?   Solution: Actually, they are very different. Record is done by “driving” the robot to a point in space, and then hitting the record button. If you Teach a position, it is not necessary to move the robot at all. This is […]
IMPACT OCCURED ERROR

IMPACT OCCURED ERROR

  Problem: I get an error that Reads: “blah blah blah… impact occurred and I know the X Y and Z values are right, and that they are in the work envelope. What’s wrong? Solution:     Probably what has happened is that the pitch was left at 0 degrees. This will cause the gripper […]
MAKING ARCS WITH G & M CODE

MAKING ARCS WITH G & M CODE

Question: How do I make an arc using G & M codes?   Solution: It’s easy! The method shown here shows you how to do it with a known end point and centerpoint. The four minute video below shows you how step by step. Sorry for the poor sound quality, but it’s real time during […]
Is There A Better Way To Teach G & M Coding By Hand?

Is There A Better Way To Teach G & M Coding By Hand?

Question: Initials on a wax block are boring and expensive!  Do you have a better way to teach G & M code basics? Solution: Sure do!  How about doing initials, or a simple graphic on a wooden yo-yo?  That’s right, a yo-yo. Students love it! Special thanks to Chris Lallier who put it all together […]

WHERE IS MY 3D MACHINE IN CNCMOTION?

Question: My CNC machine window in CNCmotion is missing and I cannot get it back! Answer: You are probably using the wrong software. When you get CNCmotion, you actually get two programs. CNCmotion; which is used to simulate machining on the students computers, and CNCbase, which is used to actually runon the machine attached to […]
HOW DO I UNLOCK MY SCREEN IN CNCMOTION?

HOW DO I UNLOCK MY SCREEN IN CNCMOTION?

Question: My screen is locked in cncmotion, and I can’t edit my stupid program! Solution: Maybe it’s not the program that’s stupid, maybe… never mind…. watch below.    83 total views
HOW DO I PUT A NEW TOOL INTO CNCMOTION?

HOW DO I PUT A NEW TOOL INTO CNCMOTION?

Question: I get an error in CNCMotion because it can’t find a tool. How do I put tools into CNCmotion? Solution: You need to manually add all the tools in your library the first time you open CNCmotion. This is critical if you want to do multiple tool operations. Watch the video below:  83 total views
Changing Stock Size In CNCmotion

Changing Stock Size In CNCmotion

Question: The stock in CNCmotion is the wrong size! How do I change it? Solution: This is an easy! Use the 3D Image menu! Watch the video below: cncmotion, software, cnc, change, stock, size,  83 total views
My screen is locked in CNCmotion, and I can't edit my program!

My screen is locked in CNCmotion, and I can't edit my program!

Question: My screen is locked in cncmotion, and I can’t edit my stupid program! Solution: Maybe it’s not the program that’s stupid, maybe… never mind…. watch below. cncmotion, software, screen, lock, unlock,  83 total views

Chris and Jim CIM
© Copyright 2020
Developed by phan1221

Visits: 3,968,631