13 Field Template

Download Consider the Field Template the “Playground” for your Dobot Magician! Place the robot’s base on the edge of the paper where it is outlined, and use the pallet to palletize, pick and place, or stack objects. There are also some “dip tanks off to the side to do...

Continue reading

12 Input-Output Guide

Download The Input/Output Guide was put together by Jim and I and tested extensively to make sure that inputs and outputs worked smoothly and were well documented. The first page outlines how peripherals are attached to the Dobot, and the second page is the Digital Signal guide that shows you...

Continue reading

06 Presentation-Dobot Blockly Hardware Connections

Download This presentation is meant to be an introduction to all of the different devices that can be interfaced with the Dobot Magician in terms of hardware. Both Jim and I suggest using this in the classroom as a student resource, rather than a presentation that you go over slide by slide;...

Continue reading

11 Blockly-Workcell Design

Download it! A robotic workcell is defined as the complete environment around a robot. This environment may include tools, machines and/or other robots.In this activity you will use a robot and a microcontroller system to recreate a workcell. Your workcell will incorporate all of the devices...

Continue reading

10 Blockly-Handshaking Dobot to VEX

Download Often robotic arms need to communicate with other devices or controllers in a work cell, or factory. This is called HANDSHAKING and can be done between different machines, devices and robots. It is a very simple form of communication and is done with simple ones and zeros; or “ons” and...

Continue reading

09 Blockly-VEX to VEX Handshaking

Download Often the process of handshaking goes beyond a robot’s need to communicate with another robot. In industry the process of have Programmable Logic Controllers (PLCs) communicate with each other, or Robotic arms can be just as simple as having two robots communicate. It is a very simple...

Continue reading

08 Blockly-Arduino to Arduino Handshaking

Download Often the process of handshaking goes beyond a robot’s need to communicate with another robot. In industry the process of have Programmable Logic Controllers (PLCs) communicate with each other, or robotic arms can be just as simple as having two robots communicate. It is a very simple...

Continue reading

07 Blockly-Dobot to Dobot Handshaking

Download Robotic arms need to communicate with other robots in a work cell, or factory. This is called HANDSHAKING and can be done between different machines, devices and robots. It is a very simple form of communication and is done with simple ones and zeros; or “ons” and “offs”. In this...

Continue reading

06 Blockly-Start & Stop the Conveyor

Download Robotic arms need to communicate with each other as well as other peripherals such as conveyor belts or linear rails in order to move materials or products through stages of a work cell. In this activity you will learn how to program a robot to control a material conveyor. We will...

Continue reading

  • 1
  • 2

Chris and Jim CIM
© Copyright 2020

Visits: 4,508,220