Need Some Distance Learning Ideas for COVID-19?

Now that more kids are attending an online high school, they will have more spare time in their hands. Here’s a short list of some of the things that you could do in CIM class with your kiddos while trying out distance learning. All will require a computer (That’s what the C in “CIM”...

How to change ramping in HSM

Written by Chris Hurd.

Download handout with images Question: When I make a pocket in Inventor, and then try to machine it with HSM, it takes forever to start cutting, and it swirls down into the part and moves very slowly. How do I get rid of this? Thanks for the question Marianne! Solution: CAUTION: The...

HSM: Basic Part Setup

Written by Chris Hurd.

Do this FIRST when machining a part using HSM. 1,832 total views

How do you install the HSM Toolstore and a Post Processor?

Written by Chris&Jim CIM.

Question: How do you install the HSM Toolstore and a Post Processor? Solution: The trick is to have the right files and know where to put them! Watch the video below as Jim tells us where to put the files that can be downloaded at the link below. Be sure to unzip them first. Download the Post...

What else do we need to teach CIM?

Written by Chris&Jim CIM.

Question: What else do we need to really teach CIM? Are there any “extras” that you recommend? Answer: We get this question weekly. So here’s what we are going to do. Give you a preview to a Google doc that is live so we can update it on the fly. You will see it right below this...

CNC Vocabulary For HSM

Written by Chris&Jim CIM.

Question: Since I switched from EdgeCAM to HSM, the vocabulary is a little different. Do you have any Key Terms that you use in your classroom that you wouldn’t mind sharing? Answer: Of course not! The terminology is a little bit different when you switch from EdgeCAM to HSM, but the concepts...

How do I get G&M Code Using Inventor HSM?

Written by Chris&Jim CIM.

Question: How do I get G&M code from Inventor HSM to make my actual part on the milling machine? Answer: post-code-with-hsm It’s really gotten very easy to do with HSM. Follow the directions below, and you should be all set! Be sure to download the PLTW tool library, and watch video...

HOW DO I USE HSM, THE CAM TAB IN AUTODESK INVENTOR?

Written by Chris Hurd.

Question: How do I use HSM, the CAM tab in Autodesk Inventor? Solution: Do we have some tutorials for you! Jim and I put this together, as Jim has been playing with it for some time now, and we feel comfortable enough to put out some videos. Please keep in mind that these videos are only...

Visits: 4,522,578