The Basics: Tooling For CNC Machines

The Basics: Tooling For CNC Machines

There is so much to learn about tooling when it comes to cnc machining equipment, that it can really be overwhelming. Here we present just the basics as it pertains to a “rookies” classroom. There are complete courses on these topics, but this should get you started First of all, We have put together a […]
What's the Difference Between Climb and Conventional Cutting?

What's the Difference Between Climb and Conventional Cutting?

QUESTION: What is the difference between Climb & Conventional cutting? ANSWER: Milling tools can advance through the material so that the cutting flutes engage the material at maximum thickness and then decreases to zero. This is called Climb Milling. Cutting in the opposite direction causes the tool to scoop up the material, starting at zero thickness […]
What is Chip Load?

What is Chip Load?

QUESTION: What is Chip Load? ANSWER: Chip Load is defined as the thickness of material cutaway by each cutting tooth. See the explanation below in an excerpt from the downloadable powerpoint! CNJ CNC TOOLING BASICS    4,974 total views
What is Stepover?

What is Stepover?

QUESTION: What is Stepover? ANSWER: Stepover is defined as the the space between passes of a tool during an operation. The HSM default is 95%, making a very smooth finish on a surface with a ball end mill, but it will sacrafice machine time. In other words, it’ll take forever!  You can change it to 1/2 […]
What is Depth of Cut? How Deep can I Cut on a Single Pass?

What is Depth of Cut? How Deep can I Cut on a Single Pass?

QUESTION: What is Depth of Cut? How deep can I cut on a single pass? ANSWER: Great question! a good rule of thumb is the depth of cut shouldn’t be greater than 1/2 the diameter of the tool; especially on smaller machines.  Any more than this and you risk messing up the bearings in your […]

Chris and Jim CIM
© Copyright 2020

Visits: 4,513,213